How to Get a Toyota Replacement Key
If your Toyota key fob isn't operating correctly, you might need an alternative battery. This is easy to do by opening the case and inserting a flat tool such as a screwdriver. Carefully remove the old battery, and then replace it with a fresh one.
It's not a full solution but it can help get you back on the road. Contact us for any questions regarding our Key Replacement Protection, which is available as part of our Tire and Wheel Protection plan.
Getting a Replacement Key
We all lose our keys at one time or another. It's not always as complicated as retracing steps and looking for the places where you usually leave them. You may also have a more serious issue for instance, a broken key fob or, more serious still, a lost one. If the key fob you have isn't working and you're not sure why, it's likely to need an upgrade in battery or could need changing its programming. There are several things you can do to find an Toyota key replacement for your car, truck, or SUV.
First, you must determine if it is missing. If it's lost, you will have to take a blank key to your local Toyota dealer and cut it. You will also need to show proof of ownership, such as your registration or insurance card. If you don't have these documents, the dealer can locate your key code using the VIN number of the vehicle. This will prevent thieves from hot-wiring the vehicle and stealing it.
If you can't find your key, try using an app to locate it. The Toyota Key Finder app is available for the majority of the most recent models of the brand, and it makes use of Bluetooth(r) technology to make your key emit an audio signal that can be detected by the app on your tablet or smartphone. The signal is strong enough to be able to reach your phone, but it's not so powerful that it would interfere with other devices at your home or office.
You can also take your key fob to an electronics store or automotive parts retailer and have it replaced. These stores are often able to program a new Toyota key and will have the item in stock. You may also have to show some form of identification, based on where you are and the policies of the store.
To ensure a proper fit and performance, you should use OEM parts when replacing the Toyota Key Fob. It is recommended to purchase the component directly through the manufacturer as it is made for your specific car model and year, and is in compliance with the highest safety standards.
Replacing the battery
It may be time to replace your battery if your car's battery is dead or you notice that your key fob is not responding as fast when you press the buttons. A new battery will eliminate the sluggishness, and increase your vehicle's chance of starting even in the cold or after an overnight stay in an outdoor parking spot. Follow these simple steps to replace the battery.
Turn off the engine, then set the parking brake and open the hood. Locate the battery, which is typically mounted on a tray in the front of the engine bay. There will be two terminals that are black (negative) and one red (positive) and which is where the cables are.
Utilize a wrench to loosen the bolt that holds the negative cable connector on the battery terminal. Take the terminal and cable off. Be careful not to drop the battery because it may rupture or leak. Place the battery in a secure place, taking care not to scratch any electrical wiring or other components of the engine bay.
You should also consider using an anti-corrosion spray on the battery terminals and battery tray before installing your new battery. This will help prevent corrosion and will help make the new battery last longer.
Find the clamp or mounting plate that is used to secure the battery when you are ready to mount it. The positive terminal on the battery must be connected to the positive terminal on the mount or clamp. Then, lower the battery into the tray, then reattach the clamp or mount.
Repeat the process with the negative terminal of the battery and cable connector. Make use of a wirebrush to clean the terminals, connectors, and clamps on the battery tray. Spray the anti-corrosion spray on the positive and negative terminals of your battery to prolong the life of your battery.
Replacing the Key Fob
The key fob lets you to lock or unlock your vehicle with just a push of the button. It can be challenging to get the fob working when it has been damaged or the battery has gone out. Luckily, replacing the fob is fairly simple and can be done at home. Here's how:
The first step is to unplug your key from the fob. It's best to have a flat tool such as a coin or screwdriver to open the case. You can utilize the detachable Toyota key to open older models, but newer models require you to insert the key into an notch.
Once you've opened the case and the circuit board is visible, you can locate it and note where the battery fits inside (it's best to snap a photo with your smartphone to make a reference). Then, take out the battery that was in use and replace it with a new one. It is essential to use the type of battery your Toyota fob requires, so make sure to consult the owner's manual or go to our service center if unsure what kind to purchase.
After you have put in the new battery, be sure to close the case and test your Toyota fob to confirm that it is working. If it's still not working then open the case and confirm that the battery is properly installed and that all connections are clean.
If everything is fine and everything is in order, you can drive your Toyota again with confidence! Contact our service department in the event that your key fob isn't working after replacing it. Our staff is available to assist you with all of your automotive requirements. Whether you're in need of a key fob replacement or a new transponder chip, we've got you covered. Give us a call today to set up an appointment! We are looking forward to serving you.
Replace the Transponder Chip
A lot of modern vehicles contain transponder chips that communicate with the car's immobilizer system. This prevents unauthorized access to the vehicle and its engine. If you lose your key fob, or it ceases to function, you'll have to get the transponder chip replaced. This can be done by a locksmith or the dealership. A professional locksmith is more likely to have the appropriate tools to complete the task.
First, locate a blank Toyota key and have it duplicated by a local locksmith. They'll have the equipment to do this for much cheaper than at the dealership. You'll also require an master key to program the new key. You can typically get these keys from a locksmith, the dealer or even online.
The chip in Toyotas is held by a split pin, that can only be reached using the key that is half-extended. Utilizing a screwdriver or whatever other method you have you have, slowly remove the plastic around the inner key until you reach the transponder. YouTube has many videos that can assist you. Once the transponder has been removed, tape it temporarily. Then, put the key that has the chip removed back in the housing and clamp it down firmly. Use super glue to close the cut if required.
Insert the master key into the ignition cylinder but do not turn it. Release and press the gas pedal six times within a period of 20 seconds after doing this. The security light should blink to indicate that the key is registered.
Then, replace the battery in your replacement key fob and check that it functions correctly. If it isn't, you need to open the case and check that the battery is properly set and the connections are clean. If replacement toyota car key have trouble contact a locksmith that specializes in automotive key replacements for a more reliable fix. USA Lock & Key is one of the companies that can offer fast and efficient Toyota key replacement services.